Hybrid 3-Phase Solar Inverter PHI VII 3P 6KW-9KW

This inverter can accept high PV voltage range and this feature will facilitate PV system installation. Besides, battery independency feature will keep inverter running no matter battery is connected or not.

Category:

Description

  • High PV voltage range up to 450V
  • Operation from grid or solar, even if the battery is not connected
  • Solar power without batteries in case of power failure
  • Self-consumption and feed-in to the grid
  • Programmable supply priority for PV, Battery or Grid
  • Programmable multiple operation modes: Grid-tie,off-grid and grid-tie with backup
  • Intelligent 3-stage battery charge control.
  • USB and RS232 ports
  • Free monitoring software
  • Transformer-free, lightweight design
  • Transfer time <10ms
  • LCD configuration screen (working modes, charging current, charging voltage, etc.)
  • Alarms and built-in protections.
  • Supports generator set input

1. LCD screen
2. Status indicator
3. Charge indicator
4. Fault indicator
5. Function buttons
6. AC input connectors
7. AC output connectors
8. On / off switch
9. FV connectors
10. Battery connectors
11. Dry contact
12. RS-232 communication port
13. USB communication port

Specifications

 

MODEL PHI-6048 V II 3P Tower PHI-9048 V II 3P Tower
PHASE 3-phase in / 3-phase out
Max. PV Array Power 9000W 12000W
Rated Output Power 6000W 9000W
Maximum PV Array Open Circuit Voltage 450 VDC 450 VDC
MPPT Range @ Operating Voltage 120 VDC ~ 430 VDC 120 VDC ~ 430 VDC
MPP Tracker Number 3 3
GRID-TIE OPERATION
GRID OUTPUT (AC)
Nominal Output Voltage 220/230/240 VAC (P-N) / 380/400/415 VAC (P-P)
Output Voltage Range 195.5 – 253 VAC per phase @ India Regulation 184 – 264.5 VAC per phase @ German Regulation
Nominal Output Current 8.7 A per phase 13 A per phase
Power Factor > 0.99
EFFICIENCY
Maximum Conversion Efficiency (DC/AC) 95% 95%
OFF-GRID, HYBRID OPERATION
GRID INPUT
AC Start-up Voltage / Auto Restart Voltage 120 – 140 VAC / 180 VAC per phase
Acceptable Input Voltage Range 90 – 280 VAC or 170 – 280 VAC per phase
Frequency Range 50 Hz/60 Hz (Auto sensing)
Maximum AC Input Current 20 A per phase 30 A per phase
BATTERY MODE OUTPUT (AC)
Nominal Output Voltage 220/230/240 VAC per phase
Output Waveform Pure sine wave
Efficiency (DC to AC) 93%
BATTERY & CHARGER
Nominal DC Voltage 48 VDC
Maximum Solar Charge Current 180 A
Maximum AC Charge Current 180 A
Maximum Charge Current 180 A
GENERAL
PHYSICAL
Dimension, D x W x H (mm) 588 x 260 x 655
Net Weight (kgs) 36 37.5
INTERFACE
Communication Ports USB, RS-232 and dry contact
ENVIRONMENT
Humidity 0 ~ 90% RH (Non-condensing)
Operating Temperature 0 to 50°C

Downloads

PHI-3P-VII-6KW9KW-manual-20180410.pdf (638 downloads)
SolarPower-user-manual-for-Hybrid-3-phsase-Inverter.pdf (512 downloads)
SolarPower_windows-32_64bit.zip (2556 downloads)
SolarPower_linux-32bit.tar.gz (399 downloads)
SolarPower_linux-64bit.tar.gz (502 downloads)
SolarPower_macosx-64bit.zip (426 downloads)

Reviews

There are no reviews yet.

Be the first to review “Hybrid 3-Phase Solar Inverter PHI VII 3P 6KW-9KW”

Your email address will not be published.

Related products